Save 50% on heating costs with the Puls-air workshop heating system
Save 50% on heating costs
Menu
Save 50% on heating costs
Save energy costs: Save up to 50 percent on your heating costs (according to numerous tests and testimonials from our customers). Thanks to the economical pulsating combustion (97 % efficiency), the purchase of our heaters quickly pays for itself.
Low installation and maintenance costs: Puls-air is easy to commission. Place the appliance in the room to be heated, route the flue gas via a 35 mm stainless steel pipe over the roof into the open air and connect to a larger tank if necessary. (20 liter tank on the appliance) Thanks to the soot-free combustion, you can also easily carry out maintenance yourself.
No more cold feet when working. Puls-air distributes the heat throughout the entire floor area. What is special about our hall heaters is that the room to be heated gains temperature amazingly quickly. This is especially pleasant on very cold winter days and increases well-being and work morale.
Protect health and the environment: The emission values are, thanks to the innovative pulsating combustion, very low, the efficiency is 97 percent. That's good for people and the environment and also saves plenty of heating oil.
Unlike standard ceiling fans, which deliver the warm, mind you, lighter air so high up that most of the warm air doesn't even reach you. At the same time, a lot of energy is wasted.
Puls-air heaters are placed on the floor of your premises to be heated and distribute the heat there very efficiently. We therefore guarantee "No more cold feet at work."
Heat distribution with ceiling fan: hot head - cold feet.
Heat distribution with pulse air: Warm feet & body.
Now there's an end to annoying noise and dust turbulence caused by heating. Puls-air operates particularly quietly. Quote from a customer advisory service at our booth at the IAA Hanover 2018: "Oh, it's already running?"
Due to specially developed fan blades and the optimal discharge velocity of the warm air, no dust is stirred up when heating the room.
Reliability & warranty Made in Austria: We develop and produce 100 percent in Austria. You receive a 2-year warranty on the complete device, and even a 3-year warranty on the burner and heat exchange unit.
Heat multiple rooms simultaneously: You can heat up to three rooms with one Puls-air unit. Each unit has two power levels: Full power and economy.
Small footprint: Your Puls-air unit requires just under one square meter of floor space, that's all. The compact design makes it possible.
Stay mobile. When moving to a new rental property, simply take your Puls-air heater with you. Dismantling is as quick as setting it up.
Error: Start image must be smaller than the number of content images
The advantage of the canister is that the device is immediately ready for use.
Huge advantage over other heaters: No additional chimney is needed to put the Puls-air heaters into operation. The 35mm stainless steel pipe serves as the exhaust system, which can be routed outdoors via a 90° bend incl. condensate drain over the roof. All information about commissioning and links to order the stainless steel pipes and bends can be found here.
Save energy costs: Save up to 50 percent on your heating costs (according to numerous tests and testimonials from our customers). Thanks to the economical pulsating combustion (97 % efficiency), the purchase of our heaters quickly pays for itself.
Low installation and maintenance costs: Puls-air is easy to commission. Place the appliance in the room to be heated, route the flue gas via a 35 mm stainless steel pipe over the roof into the open air and connect to a larger tank if necessary. (20 liter tank on the appliance) Thanks to the soot-free combustion, you can also easily carry out maintenance yourself.
No more cold feet when working. Puls-air distributes the heat throughout the entire floor area. What is special about our hall heaters is that the room to be heated gains temperature amazingly quickly. This is especially pleasant on very cold winter days and increases well-being and work morale.
Protect health and the environment: The emission values are, thanks to the innovative pulsating combustion, very low, the efficiency is 97 percent. That's good for people and the environment and also saves plenty of heating oil.
Unlike standard ceiling fans, which deliver the warm, mind you, lighter air so high up that most of the warm air doesn't even reach you. At the same time, a lot of energy is wasted.
Puls-air heaters are placed on the floor of your premises to be heated and distribute the heat there very efficiently. We therefore guarantee "No more cold feet at work."
Heat distribution with ceiling fan: hot head - cold feet.
Heat distribution with pulse air: Warm feet & body.
Now there's an end to annoying noise and dust turbulence caused by heating. Puls-air operates particularly quietly. Quote from a customer advisory service at our booth at the IAA Hanover 2018: "Oh, it's already running?"
Due to specially developed fan blades and the optimal discharge velocity of the warm air, no dust is stirred up when heating the room.
Thanks to Armin Selinger for this picture! The two of them are clearly enjoying the proximity to the Puls-air workshop and hall heating. All questions about the volume can probably be answered completely with this picture!
Reliability & warranty Made in Austria: We develop and produce 100 percent in Austria. You receive a 2-year warranty on the complete device, and even a 3-year warranty on the burner and heat exchange unit.
Heat multiple rooms simultaneously: You can heat up to three rooms with one Puls-air unit. Each unit has two power levels: Full power and economy.
Small footprint: Your Puls-air device requires just under one square meter of floor space, no more. The compact design makes it possible.
Stay mobile. When moving to a new rental property, simply take your Puls-air heater with you. Dismantling is as quick as setting it up.
Huge advantage over other heaters: No additional chimney is required to put the Puls-air heaters into operation. The 35 mm stainless steel pipe serves as the flue gas system, which can be routed outside via a 90° elbow including condensate drainage via the roof. All information on commissioning and links for ordering the stainless steel pipes and bends can be found here.
You can finally get your heating costs under control for as little as around €200 per month
!
You can either buy or lease your Puls-air workshop heater at a low price.
It has never been so easy to heat your workshop at a low price.*
*Without down payment, residual value 10% of acquisition value (AW) plus VAT, term 48 months, only for Germany. Leasing offer through our partner MMV Leasing GmbH, subject to credit checks, etc. There are no additional costs. The stated leasing rate is the net rate (plus 19% VAT for Germany). Before conclusion of the contract, MMV Leasing carries out a contract acceptance check. 2 Warranty extension and steering wheels cannot be leased and must be ordered separately if necessary. In this case, the freight costs will not be charged again.
Basically you can say:
Puls-air standard with very good insulation 600 m³.
Puls-air Plus up to max 1800 m³ with good insulation, with poor insulation 1000-1200 m³.
Very well insulated are halls or workshops built up to 5 years ago. This means insulating glazing, gas concrete walls or sandwich panels 100 mm or 120 mm.
Poorly insulated halls, for example, are just masonry buildings with poor roof.
Room temperature as desired. Based on empirical values, the room temperature of the workshop can be reduced by approx. 4 degrees, while maintaining the same comfort level for the employees, because the heat comes from below. Compared to ceiling fans from above, therefore energy is senselessly wasted.
Yes, because a room thermostat is built into the unit, which automatically turns the unit off and on to maintain the set temperature.
The external fuel oil tank is to be obtained from the local heating contractor. Requirements: Double walled, leak detection & fire protection valve.
No, the unit can be connected to an external fuel oil tank via 8mm copper pipe. Attention: No return - single line system. The tank can be up to 30 m away and the height difference must be max. 3.5 m.
The advantage of the canister is that the device is immediately ready for use.
Approx. 57 dBa, measured in a reference room. The actual noise sensation in a normally equipped workshop or hall is a pleasant light hum.
(Source Google)
Puls-air Standard: 1.5 l/h at the economy level and 1.9 l/h at the full power level
Puls-air Plus: 1.9 l/h at the economy level and 2.5 l/h at the full power level
Attention: Do not calculate on the complete day, because the device always switches itself on and off by the thermostat to maintain the temperature.
We always ask the counter question: How much do you need at the moment? - From this minus 50% and then you have the sum (All in approximate figures)
Yes, but this must be connected by us according to the circuit diagram, because the fan must run after.
App control is possible. Your local electrician should contact us in this regard!
Basically there are 2 models: Puls-air Standard (up to 600m³) and Puls-air Plus (with good insulation up to 1,800m³). For even larger premises, 2 or more units can be operated together. Thus, even larger halls and workshops can be heated efficiently and economically.
All prices on this website are exclusive of VAT. Delivery costs are listed separately in the checkout process.
180 W or 0.18 KW i.e. 0.18 KWh power consumption per hour
Operation of heaters with waste oil under 50 kW is prohibited. Diesel or fuel oil serve as fuel for Puls-air.
32 x 1.5mm wall thickness = 35mm outer diameter
8mm outer diameter
The exhaust pipes are not included and must be ordered separately. Via this link you will get to the assortment.
We will be happy to inform you about the current delivery times by mail, Whatsapp or phone.
Exhaust gas values (NOX - 25 - 30, CO - 2 - 5 ppm; soot number 00)
Request information material:
Operating instructions, folder, data sheet
Imprint | AGB & Data protection | order form as PDF | Online order form | contact us | Instruction manual
Puls-air heaters | Innsbruckerstraße 10 | A-6353 Going am Wilden Kaiser
Contact GER, CH, ITA: 0043 5358 3600 | info@pulsair.net
Contact AUT: 0043 6642015883 | austria@pulsair.net
Puls-air heaters | Innsbruckerstraße 10 | A-6353 Going am Wilden Kaiser
Contact: GER, CH, ITA:
Contact AUT: