Customer reference

Family business Fischaleck in the district of Freising has relied on Puls-air since 2022

Economical workshop and hall heating

The family business KFZ Fischaleck KG in Au in der Hallertau has been your automotive partner since 1991. All work is carried out professionally in the large and modern workshop. The company also has a car wash, which is available during opening hours. The company has been part of the 1a workshop concept since 2003. In Germany and Austria, this network connects around 1500 vehicle workshops. In a feedback letter, owner Bartholomäus Fischaleck describes his experience with the Puls-air workshop heating system from Austria, which has been heating the workshop since 2022.

Ceiling heating not effective

Mr. Fischaleck found the performance of the existing hot water heating system to be inadequate. The heat was only distributed slowly throughout the workshop, which was particularly annoying when the doors were opened and closed frequently. In addition, the heat, which was released via ceiling fans, was always under the ceiling and not where the work was being carried out - in the floor area. The owner searched the internet for alternatives, which is how he came across the oil-powered Puls-air workshop and hall heating system in 2022.

Puls-air releases the warm air where it is needed and distributes it evenly throughout the room. The manufacturer describes it as creating a slowly rotating thermal air roll in the room. The warm air is released near the floor, where it is distributed, rises, cools down again at the top and, preheated, is drawn in again and again by the appliance.

Combustion from engine research

The pulsating combustion used in the Puls-air heater, which is powered by heating oil or diesel, comes from engine research and impresses with an efficiency of 97 %. Combustion produces an oscillating column of gas that changes direction 64 times a second. Movement = heat. These changes in direction (explosions) are accompanied by a sound wave and a pressure wave, which also produce heat. With ceiling fans, for example, a great deal of heat is lost through the pipes alone, which increases heating costs and reduces efficiency. Together with the previously described heat distribution in the room, most Puls-air customers save up to 50 % of their previous heating costs, according to numerous statements.

Little space, lots of power

With a footprint of approx. one square meter and a height of approx. one meter, Puls-air is compact. It is also easy to set up. Route the flue gas outside via the roof using a 35 mm stainless steel pipe, connect the power, connect to a larger heating oil tank if necessary (8 mm copper pipe) - DONE. Puls-air is delivered ready for use on a Euro pallet.

Quiet running noise

The background noise level in workshops and halls is usually already very high. So it is a positive thing if the heating system only emits a humming noise of approx. 57 dBa, measured in a reference room. Many Puls-air customers state that this is one of the three major advantages of the heating system, along with economy and heat distribution.

Contact:
https://www.kfz-fischaleck.de/

The right heater for all workshops and halls

There are 2 models of Puls-air. Puls-air Standard up to 600 m³ and Puls-air Plus up to 1,800 m³. Both values with very good insulation. For larger premises, several devices can also be used in combination.

Why is Puls-air so much more economical?

With conventional ceiling fans, a lot of heat is lost through long pipes. Heating large quantities of water in the boiler also requires a lot of energy. In addition, conventional oil burners have poor efficiency. With Puls-air, the efficiency is 97%, meaning almost all of the fuel that is introduced is converted into heat. In addition, Puls-air stands on the floor of the room to be heated, releases the warm air where work is being done and creates a slowly rotating thermal air roll in the room. The air is not always heated from 0 way, but preheated always pulled through the heater.

Running noise and dust load

GF Schinagl also noticed positively that the running noise of Puls-air is much more pleasant and much less dust is stirred up than with ceiling fans.

From around € 130 per month
you finally get your heating costs under control!

You can either buy or lease your Puls-air workshop heater at a low price.
It has never been so easy to heat your workshop at a low price.*

*Without down payment, residual value 10% of acquisition value (AW) plus VAT, term 48 months, only for Germany. Leasing offer through our partner MMV Leasing GmbH, subject to credit checks, etc. There are no additional costs. The stated leasing rate is the net rate (plus 19% VAT for Germany). Before conclusion of the contract, MMV Leasing carries out a contract acceptance check. 2 Warranty extension and steering wheels cannot be leased and must be ordered separately if necessary. In this case, the freight costs will not be charged again.

Other references:

Markus Fischaleck with the Puls-air heater

KFZ Fischaleck KG

Customer reference Family business Fischaleck in the district of Freising has been relying on Puls-air since 2022 Economical workshop and hall heating

For reference >>
Owner Herbert Schmied with pulse-air workshop and hall heater

KFZ Schmied GmbH

Customer reference Significantly lower heating costs thanks to innovative heating from Tyrol Kfz-Schmied relies on Puls-air The company

For reference >>

Car dealer Maly

Customer reference Efficient heating since 1993 Reinhard Maly, Managing Director of Autohaus Maly in Schrems, Lower Austria, reports

For reference >>
Send message!
Have a nice day! 👋
We are happy to advise you from Mon-Fri from 08:00 - 17:00 conveniently via Whatsapp!